There are several options for replacing the front disc brake assemblies on the K11, the two most common upgrades being the AD18V and the AD22VF.

Main article: AD18V

The AD18V Brake caliper is most commonly sourced from the N14 Pulsar. The brake rotors must be changed to suit the caliper.

Rotor diameter: XXmm

Rotor thickness: XXmm

Rotor weight: XXkg

Caliper weight: XXkg

Main article: AD22VF

The AD18V Brake caliper is most commonly sourced from the GTi-R Pulsar

Rotor diameter: XXmm

Rotor thickness: XXmm

Rotor weight: XXkg

Caliper weight: XXkg

In both cases it is highly likely that the pulsar caliper will need to be spaced out slighty from the K11 hub to center it over the rotor. 1mm thick washers of appropriate size works in most cases. New pads , mint discs 3mm to center( Pulsar / Sunny N14 swap )

To be expanded on. Hurry up dens…